3D manufacturingHobi ve Oyuncak
Avro Lancaster 1:48 Snap-fit 3D Manufactured Model Kit
54 dosya; en büyük parça 177 × 45 × 36 mm
- Material
- PLA
- Production
- 3D manufacturing
Production: 7 business days
Hobi ve Oyuncak
3D manufactured fuselage, wing and structural parts set for a Y3‑layout VTOL fixed‑wing RC model with two front tilt arms and a tail motor. Includes alternative noses and both V‑tail and classic tail options.
Physical product delivery · Credit card payment
V120 Scout Y3 is a hobby‑grade VTOL fixed‑wing RC model with a V‑tail. This product is the full set of 3D manufactured parts only.
Manufacturing and materials: - Wings and fuselage shells should be manufactured in lightweight foaming PETG (LW PETG). - Structural parts such as tilt arms, motor mounts, latches, skids and plates should be manufactured in ABS/ASA. - Wing files are provided for the left side; mirror them in your slicer for the right wing.
Assembly notes: - Wing sections join with M3 heat‑set inserts and 6 mm screws. - Fuselage sections are glued; 2 mm carbon rods align the joints. - Recommended take‑off weight: ideal ~1.5 kg; maximum 2.5 kg.
What’s included (high level): - Fuselage front/mid/rear sections and hatches, left wing segments and ailerons, tilt motor arms and mounts, tail boom interface parts, full V‑tail set plus optional classic tail module, alternative noses (gimbal mount, square action‑cam nose, fixed camera aerodynamic nose), landing skids, quick‑release latches, flight‑controller and battery plates, GPS bay and covers.
Not included (user supplies): - Carbon tube 10 mm (~1 m), carbon rods 3 mm and 2 mm - Tail boom (15 mm square aluminum or carbon, 25–30 cm) - Steel pushrods (≥1 mm) and quick links - M3/M2 heat‑set inserts and screws - Servos (ailerons/tail and tilt) - Three 2810‑class ~900 KV brushless motors with props and ESCs ≥45 A - Flight controller, receiver/transmitter, 6S LiPo/Li‑ion battery
Note: Manufactured parts only; no electronics or hardware. Please compare STL measurements with your setup before ordering.
Assembly view

Suggested hardware: three 2810‑class ~900 KV motors with props, ESCs ≥45 A, 6S LiPo/Li‑ion battery, flight controller and RX/TX, servos for ailerons/tail and tilt. Mechanics: 10 mm carbon tube (~1 m), 3 mm and 2 mm carbon rods, 15 mm square tail boom (25–30 cm), ≥1 mm pushrods and links, M3/M2 heat‑set inserts and screws.
This order is for a physical part. STEP / STL files are private and are not included.
This product is made in our Bursa factory. We also produce custom parts from your file or sample: 3D FDM production, hobby toys and model kits.