3D manufacturingHobi ve Oyuncak
Avro Lancaster 1:48 Snap-fit 3D Manufactured Model Kit
54 dosya; en büyük parça 177 × 45 × 36 mm
- Material
- PLA
- Production
- 3D manufacturing
Production: 7 business days
Hobi ve Oyuncak
VW Combi–inspired wind-up 3D manufactured toy van kit. Works by pull-back or side winding wheel. Available in Standard 4x4 and Dragster styles.
Physical product delivery · Credit card payment
This VW Combi (Volkswagen T1 van) inspired kit is a fully 3D manufactured wind‑up toy. The drivetrain is entirely manufactured: spiral spring, gears and a freewheel mechanism. Wind it by pulling back or by turning the side wheel; release to go.
Variants: - Standard 4x4: soft spring with longer gearing for longer travel. - Dragster: stiff spring with short gearing, wide rear tires, spoiler and diffuser. Side panels are blank.
Assembly (short guide): install the axles and spring axle on the chassis, seat the printed spring into the freewheel gear, stack the transmission gears with spacers, add the intermediate piece and wheel gears, fit the tires on rims, test the mechanism before gluing the roof. Lubricate the gear mesh for best performance.
Optional grip upgrades: TPU tires or rims for 22 × 2.5 mm O‑rings (O‑rings not included).
Requirements: a bit of glue, small hammer, lubricant; a caliper is recommended.
Approx. print weights by variant: Standard 4x4 352 g; Standard compact layout 254 g; Dragster 297 g; Dragster compact 286 g; Standard large bed (dual nozzle) 290 g; Dragster large bed 189 g; Dragster fast print layout 305 g. Accessories: blank side panels 93 g; roof rack & surfboard 164 g; sliding roof 197 g; O‑ring rims 10 g (O‑rings not included); Dragster TPU tires 8 g.
Assembly steps (photos)









VW Combi–themed model; not a real vehicle part.
This order is for a physical part. STEP / STL files are private and are not included.
This product is made in our Bursa factory. We also produce custom parts from your file or sample: 3D FDM production, hobby toys and model kits.